Weather by You!

Templates and Projects support => Php templates => Topic started by: antosere on March 08, 2013, 04:15:03 PM

Title: edit template
Post by: antosere on March 08, 2013, 04:15:03 PM

hi,
we have a base surface aviation aircraft and helicopters.
I write because I have tested one of your templates for my weather station.
I use cumulus, now I noticed as image data values ​​are missing under the heading of the sea level pressure
I'm missing:
absolute pressure (QFE)
relative pressure (QNH)

the pressure assuluta must perform questionnaire calculation:
pressure (QFE) -32.300 hPa
and the relative pressure to be added in the third row I should do this calculation:
  pressure (QNH) -32.300 hPa

and also convert the pressure in inches of mercury



more I would like to ask also how to do the conversion of the wind in miles per hour and knots.

 ^-^Can you help me please?

Title: Re: edit template
Post by: Mr.Meteo on March 08, 2013, 05:37:57 PM

Hi,

Aviation is a world on itself for weather.

As your question is specific to Cumulus and not to Templates,
I'll refer you to Cumulus Forum at: http://sandaysoft.com/forum/

Regards,
Jacques

Ps As your use is commercial, think that Cumulus is 'Donationware'!  :-*

Title: Re: edit template
Post by: antosere on March 09, 2013, 07:10:33 AM

hello,
ok but I saw your last template is not yet available for download, I'd be willing to put the modules for the conversion WB2 as in the picture which I enclose, is it possible?
could you help me please?

Title: Re: edit template
Post by: Mr.Meteo on March 09, 2013, 01:42:49 PM

Hi,

If you know the formula to convert measures, php could do it!

For latest Weather Eden template will be available... mis week-end!

Regards,
Jacques

Title: Re: edit template
Post by: antosere on March 19, 2013, 10:06:18 AM

hello,
an information because I do not know what happens, I'm kind of days in any host load wheater blue v2, it gives me error 500 internal server error, I have put on multiple hosts, I did also try to download it and reload again, but to no avail.
mica could help me understand the problem?

Title: Re: edit template
Post by: Mr.Meteo on March 19, 2013, 02:34:27 PM

Hi Anto,

Error could be a problem with php... try with Weather Blues v1!
Have you succeeded with Cumulus Standard template?

Regards,
Jacques

Title: Re: edit template
Post by: antosere on March 19, 2013, 02:51:25 PM

yes, the first version works, but the problem is version 2 or hosting, because I have tried more than one hosting all different and the same problem

Title: Re: edit template
Post by: antosere on March 19, 2013, 02:53:45 PM

PHP Version 5.3.3

Title: Re: edit template
Post by: Mr.Meteo on March 19, 2013, 05:56:36 PM

Hi,

I don't see where is your error, many hundreds install with no
or little problem. Have you followed instructions step by step?
What have you made until now?

Regards,
Jacques